Product Description
The Bosch HCS01.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW is an IP20-rated digital drive controller. It is based on a basic control section. Other components that make up the drive controller include a power section, a control panel and firmware. The control panel can be used by operators to monitor and program the drive. Standard control panels do not support hot plug: operators must connect them to the controller before power on. Standard control panels connected to controllers after power on will not be recognized. Firmware for IndraDrive controllers must be ordered separately. The power section on the HCS01.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW is designed for three-phase AC input. The supported input voltage range is 200 to 500 Volts AC. Under ideal operating conditions the HCS01.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW can deliver maximum 18 Amps output. A multi-encoder interface on the unit supports multiple motor encoders such as EnDat 2.1 Hiperface, TTL, resolver, MSM encoder and SSI.
Integrated communication interface on the unit is Multi-Ethernet. Profibus is supported through an optional hardware module. The controller supports safe motion through an optional safety module. Approximate weight of the HCS01.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW is 2.1 kilograms. The height of the controller is 268 millimeters, the width is 70 millimeters, and its depth is 196 millimeters. For operation with nominal data, the controller requires 0 to 40 degrees Celsius ambient temperature. Bosch permits controller operation with derated data at temperatures of up to 55 degrees Celsius. The cooling method used for heat dissipation is forced-air cooling. The volumetric capacity of forced cooling is 56 m3/hour. Switching frequencies supported by the drive controller include 4, 8, 12 and 16 kilohertz. Operators must provide 90 millimeters of spacing on the top and bottom sides of the installed controller.
Wake Industrial Warranty
