Product Description
The HCS01.1E-W0018-A-03-B-ET-EC-EC-SB-NN-FW drive controller is mounted on the rear panel of its control cabinet by fixing two M6 x 20 screws having tightening torque of 6Nm. The Bosch Rexroth drive controller utilizes a basic control section. This product operation is exclusively done using plugged-on connectors even if they have no connected lines. The device incorporates the same metal as that of the outer conductors for its equipment grounding conductor. This unit has tightening torque ranging between 0.5Nm and 0.8Nm for the cable used to connect its power supply. It comes with Safe Motion Bus support that has two bicolor LEDs for safety technology and connection status.
The product encompasses digital inputs/outputs adhering to IEC 61131 specifications. This device features 2mA to 5mA current consumption for the digital inputs of Type A. The unit portrays overload protection as well as short-circuit protection for standard digital outputs. Its analog voltage and current inputs must be connected only with a shielded cable if the cable length is more than 30m long. This controller’s operating states and pending warnings are highlighted on the display of the fitted control panel. The product has a relative humidity between 5% and 95% all the time. This drive controller depicts a warranty period of one year.
The device has 1g vibration sine acceleration at 57Hz to 150Hz according to EN 60068-2-6 specifications. This unit has onboard connecting points for the equipment grounding conductor. Its transportation must be done between -20°C and 70°C. The controller is helpful for labeling as well as digital and label printing applications. This product has eight digital inputs. This device features a +/-10V voltage rating for its 14-bit analog input. The unit deploys a multi-Ethernet communication module. It is cooled by internal air circulation. It cannot be operated by unauthorized personnel. This drive controller delivery is done by logistics agents with a worldwide network.