Product Description
The Bosch Rexroth HCS01.1E-W0018-A-03-B-ET-EC-EC-S5-NN-FW drive controller has IP 20 degree of protection. This drive controller comprises eight digital inputs including two probe inputs. The product has no compatibility with a resolver encoder system. This device has 1 design code. The unit is associated with a feeding power supply. Its control panel encompasses four keys for its operation. This controller should undergo no structural modifications. The product is never to be utilized with accessories or parts not specified in its documentation. This device helps to fill, close, palletize, erect and label cartons. The unit can perform data buffering of an MSM encoder using encoder cables with D-Sub connectors or a battery box.
This controller permits the inclusion of an SD card in its control panel if it is of an advanced type. It allows an optional encoder to be connected to the X8 connector to emulate incremental as well as absolute encoder signals for further evaluation. The product has two differential outputs and two differential inputs for the transmission and reception of data. This device also features two digital inputs operating like travel range limit switch inputs. The unit is characterized by a reference potential for its digital inputs. Its Type 2 relay contact has an ohmic time constant of load. This drive controller comes with backup support for a year from Wake Industrial.
The product portrays the control panel fitting on its control section. This device uses an isolating transformer if the installation elevation is between 2000m and 4000m over sea level. The unit features a 3K3 climatic category during operation as per IEC 721 specifications. Its components may get damaged as a result of long-term storage. This controller can have no icing or moisture condensation on its surface at any time. The product cannot have heat-sensitive materials near its braking resistor. The HCS01.1E-W0018-A-03-B-ET-EC-EC-S5-NN-FW controller dispatch is done in rugged packaging.