Product Description
The HCS01.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW drive controller from Bosch Rexroth belongs to the HCS product group of offerings. This drive controller primarily comprises a control section and a power section. The product is an integral part of the manufacturer’s drive system. This device controls and monitors the operation of a motor. The unit can be used with the MSM, MCL, MSK and MS2N range of motors from the same manufacturer. It is a good choice for use in general automation, assembly and handling systems. This controller has a compact construction. The product design is such that its installation must be inside a control cabinet.
This device installation must be done only in the upright orientation. The unit incorporates a multi-Ethernet module including a SERCOS III interface for communication. It has a mains connection voltage of 3 x 200VAC to 500VAC. The controller has a HAP01 series control panel fitting to assist its operation. This product can trigger property damage when used for improper applications. The device comprises Category C3 components as per IEC 61800-3 specifications. This unit can be operated only in an industrial environment. Its firmware has to be procured as a separate subitem. The controller is capable of performing the function of a converter. This drive controller has a one-year warranty.
The product is not intended to be used underwater. This device must never be operated without reading and understanding the associated documentation. The unit may move dangerously if the related motor has a faulty control. It is likely to pose a health hazard to people with pacemakers if used inappropriately. This controller should not have conductive dirt contamination on its surface. The product has a III overvoltage category in accordance with IEC 60664-1 specifications. This device dissipates heat by means of air circulation. The unit can get damaged because of unclean air inside the control cabinet. This drive controller dispatch is done globally.
Wake Industrial Warranty
