Product Description
The Bosch Rexroth HCS01.1E-W0018-A-03-A-ET-EC-NN-L4-NN-FW drive controller has a control voltage based on the motor cable and holding brake, its power consumption and current carrying capacity of the connecting point. This controller is put to use for filling and closing, erecting and palletizing cartons in the food and packaging industry. The product implements integrated brake current as well as monitoring. This device supports a combination of an SSI and 1Vpp sin-cos encoder. The unit features components made of metals and synthetic materials. Its control panel features a single-line display. This controller is to be de-energized and secured against re-energization before working on any of its live parts.
The product has a couple of digital inputs functioning like travel range limit switch inputs. This device also features probe inputs with a minimum pulse width of 4μs. The unit is connected with the SBC and Safe Torque Off safety module at the X49 connector with a stranded wire connection cable. Its digital signal lines must portray grounded shields at both ends with the lowest possible impedance over a large surface area. This controller should have its mains connection lines and motor power cables routed in parallel for a distance of up to 300mm. The drive controller uses a year’s backup support from Wake Industrial.
This product is not supposed to have more connection lines than what is needed. The device incorporates a differential input for its multi-encoder interface. This unit uses firmware with a control panel. It is to be transported at a temperature between -20°C and 70°C. The controller needs to be run for at least an hour once a year when it is stored for a prolonged period. This product has 1g vibration sine acceleration between 57Hz and 150Hz frequency. This HCS01.1E-W0018-A-03-A-ET-EC-NN-L4-NN-FW drive controller dispatch is done in rugged packaging to avoid transportation damages.
Wake Industrial Warranty
