Product Description
The HCS01.1E-W0018-A-03-A-ET-EC-EC-NN-NN-FW Bosch Rexroth drive controller has no safety technology. This controller works well with an MSM, MS2N, MCL or MSK series motor from the same manufacturer. The product is utilized in the food and packaging industries. This device portrays IP 65 degree of protection. The unit uses a CANopen or PROFIBUS DP interface for alternative communication. Its three mains input terminals can be used only on a solidly grounded wye source. This product encompasses freely configurable digital inputs/outputs. The device depicts two multi-encoder interfaces. This unit causes property damage or personnel injury due to its improper use and installation.
The controller should be used only in its original state without any hardware modification. This product cannot be operated underwater. The device operation is allowed only in the specified combination and configuration of components. This unit features components that cannot be used in a public low-voltage mains supply for residential areas. It controls the holding brake in a motor. The controller installation must take place as per the EMC requirements. This product tends to have a high working current causing electric shock due to incorrect use. The device is to be commissioned only if the emergency stop switch of the machine is in working condition. This drive controller comes with a year’s Wake Industrial warranty.
The product is connected to DC bus capacitors if needed with twisted lines. This device comes along with the required mounting and connection accessories. The unit has IP 20 protection rating as per IEC 529 specifications. Its equipment grounding conductor is to be connected to its housing with an M5 x 12 screw featuring 5Nm tightening torque. This controller has reduced performance when the ambient operating conditions are exceeded. The product supports an advanced control panel with a slot for a memory card. This drive controller transportation is done in custom military-grade packaging.