Product Description
Introduced by Bosch Rexroth, the HCS01.1E-W0018-A-03-A-CC-EC-NN-L4-NN-FW drive controller does not support single-phase operation. This product has a height of 268 mm and a width of 70 mm. This device is compatible with the manufacturer's IndraDrive platform. The unit incorporates Safe Torque Off and Safe Brake Control safety technologies. Its firmware is intended to be bought as a separate subitem. This product must always be installed inside a control cabinet. The device encompasses a control panel to support its operation. The unit can be used with the manufacturer's MSM, MCL, and MSK range of motors. It is utilized in various industrial systems such as automated assembly and handling, palletizing, and pick-and-place systems. This product has two probe digital inputs and one combined input/output that is configurable as a digital output or a digital input. The device should be programmed before it is commissioned so that the related motor performs the application-specific functions. The unit contains Category C3 components with limited availability as per IEC 61800-3 specifications. Its dangerous movements because of faulty motor control may cause unfavorable consequences.
This product has a leakage current of more than 3.5 mA. The device must be disconnected from the power when it is being cleaned, stored for a long period without use, or repaired. The unit should be allowed to cool down for at least 15 minutes after it is switched off. It is compatible with selected third-party motors. This drive controller should be handled using suitable equipment and tools during its transportation and mounting.
Wake Industrial Warranty
