HCS01.1E-W0018-A-03-A-CC-EC-ET-NN-NN-FW

Product Description

The HCS01.1E-W0018-A-03-A-CC-EC-ET-NN-NN-FW drive controller from Bosch Rexroth is an integral part of the manufacturer's IndraDrive C drive system. This controller works in conjunction with the manufacturer's MSM, MSK, or MCL range of motors. The product has a compact construction. This device encompasses a control panel with programming module functionality. The unit comprises an advanced control section. It must be installed only in the vertical orientation.

This controller has a width of 70 mm. The product supports a wide range of encoders for feedback. This product can trigger unfavorable consequences as a result of mishandling. This device can be used in single-axis and multi-axis drive and control tasks. The unit contains Category C3 components with limited availability as per IEC 61800-3 specifications. It should be installed and operated only after reading and understanding its documentation. This controller is meant to comply with the safety requirements and regulations of the country in which it is operated. The product comprises electrical parts with more than a 50 V rating during the operation phase. This device must be installed inside a control cabinet. The unit has a leakage current of more than 3.5 mA. It tends to move dangerously because of faulty control of the associated motor.

This controller is meant to be installed only in a machine for which a risk assessment has been made. The product helps in controlling the holding brake of a motor. This device needs at least 15 minutes to cool down after it has been switched off. The unit contains batteries with active chemicals in a solid housing. It should be dismounted only after relieving its pressure. This drive controller has a mains connection voltage of 3 x 200 to 500 VAC.