Product Description
The Bosch Rexroth HCS01.1E-W0018-A-02-B-ET-EC-NN-SB-NN-FW is a drive controller. It belongs to the IndraDrive Cs product line. Target applications for HCS devices include printing machines, machine tools, handling, general automation and the packaging industry. Bosch has developed HCS controllers according to the state-of-the-art. The devices are tested prior to delivery to ensure operational safety and reliability. The controllers have been designed for use in an industrial environment and may only be used as intended. Failure to use HCS controllers in the intended way or for the approved applications may cause situations resulting in property damage and personal injury. The HCS01.1E-W0018-A-02-B-ET-EC-NN-SB-NN-FW controller is designed for forced air cooling. It takes in cool air through an inlet on the bottom side and releases heated air through an outlet on the top. Bosch recommends large cabinets for HCS controller mounting.
The ambient temperature range for HCS controllers should be 0 to 40 degrees Celsius. Bosch has designed the HCS01.1E-W0018-A-02-B-ET-EC-NN-SB-NN-FW controller for maximum 18 Amps output. The input voltage range is 110 to 230 Volts AC. Only three-phase AC systems can be connected to the controller input. The IP20 rated controller is designed for vertical mounting. HCS controllers can have three types of control sections. The control section on the HCS01.1E-W0018-A-02-B-ET-EC-NN-SB-NN-FW belongs to the basic category. The integrated communication interface on the controller supports Multi-Ethernet, which allows multiple connection through the same physical interface. In addition the HCS01.1E-W0018-A-02-B-ET-EC-NN-SB-NN-FW is equipped with an integrated multi-encoder interface. The safety module on the unit supports safe motion bus. Operators can use a standard control panel to configure and program and the drive controller. For optimal performance, Bosch recommends professional installation for its industrial devices.
Wake Industrial Warranty
