HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW

Product Description

Bosch Rexroth is a well-known manufacturer and supplier of industrial automation and control devices. The devices include spindle motors, frequency converters, drive converters, and power supply modules.

The HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW model is a part of the HCS01 series designed by Rexroth Indramat. The converter unit comes with 8 digital inputs and 2 probe inputs. The HCS01.1E converter unit comes with a built-in brake current measurement and monitoring system. This model provides extra safety to the system by the hall sensor adapter box SHL03.1 to operate MCL linear motors with digital hall sensors. The unit provides 2 slots for buffering the data of MSM series encoders. One is a battery box that can be mounted near the motor. On battery box is required for each drive controller. The encoder cables with D-sub connectors are intended to be connected to a battery or uninterrupted power supply. The HCS01.1E converter unit is cooled through a performance-dependent fan control. The converter unit needs to be protected from rain and moisture. It may be installed in a control cabinet with sufficient cooling arrangements.

The model HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW firmware should be ordered as a separate sub-position. The firmware is required for the accurate operation of the motor. If any fatal error is faced, the winding short circuit at the motor output will be experienced for shutdown as a reaction. The converter unit promises scalable signal processing through multi-Ethernet support. The IP20 degree of protection makes it suitable for a variety of complex applications. The model (HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW) is suitable for handling machines, printing and paper processing machines, and robotics. The unit comes with a one-year warranty that can be claimed in case any defect is faced.