HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-AW

Product Description

The HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-AW drive controller belongs to the HCS product group of such offerings. The Bosch Rexroth controller works with selected third-party motors and motors from its manufacturer. This product is largely utilized for solar cell production as well as semiconductor or wafer production, handling, metalizing and cleaning. The device houses a basic type control section. This unit should undergo no structural changes for safe operation. Its control panel highlights the operating states, pending warnings as well as error and command diagnoses on its display. The controller features a 2mA minimum input current for its probe inputs. This product portrays a compact construction.

This device renders standard encoder evaluation with its supported encoder system. The unit storage, as well, as transportation must be done in a horizontal orientation. Its control cabinet features IP 54 degree of protection. This controller comprises a multi-encoder interface that supports several standard encoders. The product is sized at 70 x 268 mm (W x H). This device features compatibility with the manufacturer’s IndraDrive platform. The unit has a mains connection voltage of 3 x 110VAC to 230VAC. It is possible to extend the number of digital and analog inputs and/or outputs. This drive controller with a warranty for one year is sent to any preferred address.

The product portrays lesser than standard performance when it operates between 40°C and 55°C. This device operation can be done only in the specified configuration and combination of components. The unit must never be mounted nor connected with components that have not been approved by the manufacturer. Its components adhere to the EMC limit values for radiated noise and line-based emission. This controller has absolute humidity ranging between 1g/m³ and 60g/m³ during its transportation. The product along with its connected motor form an integral aspect of a drive system. This device’s surface becomes very hot and causes burns if touched with bare hands during operation.