Product Description
The HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW drive controller offered by Bosch Rexroth supports installation at an altitude of 1000m over sea level. This motor is designed for use in only NFPA 79 applications. The product transportation and storage cannot be done in an upright orientation. This device contains components with electrolytic capacitors that tend to get deteriorated during the storage period. The unit needs to be run for at least an hour once a year if it is kept in storage for a long period. It is fixed to the control cabinet using M6x20 mounting screws with a tightening torque of 6Nm. The controller can get damaged by high temperatures.
This product needs equipment grounding conductor connection to be established at the grounding points before it is switched ON and commissioned. The device operation should be done exclusively with plugged-on connectors. The unit features three terminals on its X3 connecting point for connection to the supply mains. Its terminal connectors must be equipped with strain relief inside the closed housing. The controller depicts 2 pollution degree according to EN 50178 specifications. This product features 196mm depth. The device depicts 70W power dissipation at a continuous current. This HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW controller features backup support for one year.
The controller supports Safe Torque OFF safety technology. This unit is connected with the encoder through its X4 connector. It features compatibility with a control panel that has a programming module function. The product has a standard design. This device is to be programmed before it is commissioned for the motor to perform the application-specific functions. The unit is not designed for operation underwater. It is required to take additional interference suppression measures for operation in a residential area with a low-voltage public mains supply. This controller can be shipped to any location across the globe through our delivery agents.
Wake Industrial Warranty
