HCS01.1E-W0013-A-02-B-ET-EC-EP-NN-NN-FW

Product Description

The HCS01.1E-W0013-A-02-B-ET-EC-EP-NN-NN-FW is a sophisticated industrial converter produced by Rexroth Indramat to improve the operational efficiency of industrial production and processing machines by accurately controlling the operation of electrical motors supplying the machines with the kinetic energy they require for optimum operation. The industrial converter is an environmentally friendly device that does not generate a high amount of noise during operation, the converter does not also release any dangerous chemical substances such as mercury, asbestos and silicon. The housing of this electrical converter is designed to provide the internal components of the converter with a high degree of protection from solid foreign materials with an external interference higher than 12 millimetres, however, to increase the level of protection, the converter should be installed into another control cabinet that can provide minimum protection that meets the IP54 protection class.

The HCS01.1E-W0013-A-02-B-ET-EC-EP-NN-NN-FW electrical converter features a multi-ethernet command communication interface, it also features a multi-encoder interface that can effectively interpret digital signals from a wide range of motor encoder designs including the MSM, SSI, C, and MS2M encoder designs. The operational temperature of this electrical converter is regulated by forced ventilation, the controller features an internal air blower which generates internal air in the housing of the motor. The HCS01.1E-W0013-A-02-B-ET-EC-EP-NN-NN-FW industrial converter is also specially designed to allow for direct integration into the industrial servo system, however, to aid the temperature regulation process, the converter should be installed into a position that exposes it to cool air.

The HCS01.1E-W0013-A-02-B-ET-EC-EP-NN-NN-FW industrial converter operates with an input current of about 13 amperes, and mains connecting voltage that falls between 110 to about 230 volts. Also, to prevent electrical accidents, it is important to ensure that the converter is properly grounded before it is switched on for operation.