Product Description
The HCS01.1E-W0013-A-02-B-ET-EC-CN-L4-NN-FW drive controller houses a CANopen interface at the X61 connector for alternative communication. This Bosch Rexroth drive controller has no support for single-phase operation. The product handling and mounting must be done using suitable tools and lifting equipment accurately. This device is free of harmful substances that have adverse effects on the environment. The unit mounting is meant to be done only in the G1 position. It comes along with the HAS09 mounting and connection accessories kit. This controller transportation and storage should be done in a horizontal orientation. The product must be placed at a considerable distance from adjacent equipment within the control cabinet or closed housing.
This device has breaking resistors at its rear that become hot when it is in use. The unit must portray direct contact with the wall of the control cabinet. It is mounted onto the control cabinet using two M6 x 20 screws. The controller requires strain relief measures to be implemented for its terminal connectors. This product has three terminals on its X3 connector to connect to the mains supply. The device features Safe Torque Off or Safe Brake Control safety technology. This unit is directly connected to the equipment grounding conductor. The drive controller has a warranty for one year.
This product helps to control the holding brake of the motor. It is equipped with a Bb relay contact. The device has two yellow and green colored port LEDs on the multi-Ethernet interface. This unit cannot be operated at a temperature higher than 55°C. Its firmware has to be procured as a separate subitem. The controller encompasses freely configurable digital inputs/outputs. This product uses a Hall sensor adapter box for operating an MCL series linear motor with a digital Hall sensor. This drive controller delivery is done in custom military-grade packaging to avoid damage during transit.
Wake Industrial Warranty
