Product Description

The Bosch Rexroth HCS01.1E-W0009-A-02-B-ET-NN-L4-NN-FW drive controller comes under Category C3 (with limited distribution) according to IEC 61800-3. The device is not meant for use in residential areas. It is intended for use in high-power machines in industrial environments. If the device is used with a low-voltage mains supply, it can result in high-frequency interference. The unit has a maximum current rating of 9 A. It should be noted that only qualified persons are allowed to work on the components of the electric drive or within its proximity. The drive controller has a compact type of construction. Its compact nature helps with easy installation and commissioning. The unit is equipped with a control panel that comes with a programming module function. The device should be mounted in the G1 position within a control cabinet. Filters should be installed at the air intake opening of the cabinet to ensure that unclean air does not enter the control cabinet. There are adhesive labels on the sides of the device with notes on safety and warning signs. There are braking resistors at the back of the HCS 01 drive controller, which are likely to become very hot when the device is live. The user should ensure that there aren’t any materials that are sensitive to heat near the braking resistors. In the event of right-hand and left-hand mounting, the devices should not be piled. Care should be taken to ensure that each device is in immediate contact with the wall of the control cabinet. When the power is turned on, the electrical connection points of the parts of the product should not be touched. Similarly, when the device is live, connectors should not be plugged in or removed.