Product Description
The HCS01.1E-W0009-A-02-B-ET-EC-EM-S4-NN-FW drive controller produced by Bosch Rexroth can cause undesirable damage if the safety instructions are not followed. This controller functioning is allowed only if the application meets the national EMC regulations. The product functions like a secondary drive or a servo drive in compact machines for applications like wood machining. This device comprises one 14-bit analog input with a +/-10V voltage rating. The unit deploys Safe Motion integrated safety technology at the X41 connector. Its capacitors comprise electrolytic capacitors that tend to deteriorate due to an extended storage period. This controller should ideally be done at an altitude of 1000m over sea level.
The product uses batteries for the operation of the control panel. This device must depict no structural changes. The unit supports connection only with those accessories that have the approval of its manufacturer. It has to be programmed before it is commissioned for the motor to execute its applications correctly. This controller function is prohibited when the surrounding maximum temperature is very high. The product requires shielding measures and mains filters to be used to implement additional interference suppression measures. This device is to be operated by people authorized or trained to switch electrical circuits on and off. The drive controller comprises one-year backup support.
This controller must adhere to the specified ambient as well as operating conditions. The unit may have high electric current because of improper use. It cannot be used even for a brief period if the equipment grounding conductor is not connected properly. This product needs to be disconnected from the mains and secured against reconnection before accessing its live parts with more than 50V voltage. The device tends to depict dangerous movement signs if the related motor has operator errors. This drive controller dispatch is executed by means of well-known logistics teams with a worldwide presence.