Product Description
The HCS01.1E-W0009-A-02-B-ET-EC-EM-L3-NN-FW drive controller is housed in a control cabinet that has an IP 54 protection rating. This Bosch Rexroth controller is UL Listed and CSA Certified. The product is designed for operation between 0°C and 40°C. This device tends to malfunction if the related control cabinet is operated with a fan but no corresponding filters. The unit has a short circuit current rating of 42000Arms. It is necessary to service the filters of the control cabinet at regular intervals based on the dust in the environment. This controller is intended to be subject to a compatibility test between its housing and new lubricants or cleansing agents.
The product incorporates standard, right-hand or left-hand mounting. This device depicts a mass of 0.72kg. The unit must not have any combustible materials placed over it. Its back panel is mounted directly on the mounting surface in the control cabinet. This controller and its components can be mounted only in the G1 position. The product has digital inputs/outputs that correspond to IEC 61131 specifications. This device also has an analog voltage input with a voltage rating between -30V and 30V. Its power requirement is based on the sum of the power values of the basic setup, external loads, optional connection interfaces and external loads. This drive controller depicts a warranty for one year.
The product renders support for encoder emulation through a D-Sub connector with 15 poles at the X8 connecting point. This device has two yellow LEDs and two green LEDs for its multi-Ethernet module. The unit requires a grounding of the shields of its digital signal lines at both ends with low impedance and over a large surface area. Its motor power cables have to be shielded or run in a shielded duct. This controller uses a shielded cable of a maximum of 40m in length to connect the module for encoder emulation. This HCS01.1E-W0009-A-02-B-ET-EC-EM-L3-NN-FW drive controller dispatch is done to any address of your choice.