HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-NN-AW

Product Description

Bosch Rexroth is in a league of its own when it comes to making industrial products. These items are renowned for their quality, durability, and efficacy. The company provides the following in addition to controllers, motors, converters, servo drives, amplifiers, inverters, and power supply modules: servo drives.

The HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-NN-AW model has a maximum output current rating of 8 A and a minimum output current rating of 2.7 A. This model is only compatible with the mentioned accessories and attachments, and the multi-ethernet connection module is supported. The HCS01.1 drive controller's operational capabilities are unaffected by temperatures as high as +40 degrees Celsius. Only if the installed machine or configuration fulfills national rules, safety requirements, and appropriateness criteria may the drive controller be activated. The drive controller, which must be placed in G1 configuration, should only be accessible to authorized users. Attached to the controller is a blower that pulls air from the base and exhales it through the head. Therefore, it is essential to provide enough room. The HCS01.1 drive controller's fundamental control section and cutting-edge technology ensure a long, trouble-free life. The input current rating for this model is 2.5 A, while its short circuit current rating is 42000 A rms.

The model HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-NN-AW must be positioned between 0 and 1,000 meters above sea level in an environment with relative humidity below 95%. This 1.30-kilogram Rexroth Indramat drive controller is a cutting-edge example of motion control technology. The IP20 enclosure provides protection against dust and other environmental threats. If safety sensors detect excessive voltage or current, the model is disabled. Interface 1 of this drive controller (HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-NN-AW) is a multi-encoder. Each and every drive controller is submitted to a battery of stringent quality control tests and inspections before being sent to clients.