HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-AW

Product Description

Bosch Rexroth is the market leader when it comes to manufacturing high-quality drive controllers, motors, and other automation components. Their products are used in a variety of industries, including the food preparation and material handling sectors.

The HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-AW model is equipped with L4 STO (Safe Torque Off) and SBC (Safe Brake Control) interface 3. The housing of this type is IP20 dust-resistant and has an output current rating of 2.7 A. The HCS01.1 drive controller is built with modern hardware components to provide a long, maintenance-free lifespan. The gadget is fitted with safety sensors that deactivate it upon detection of high voltage or current. The controller must be powered by a feed power supply unit and operate in a 3K3 environment with relative humidity below 95%. For optimal performance, the model must be in the G1 position. The manufacturer created the drive controller with a certain environment in mind, taking into consideration the temperature, altitude, and humidity. To cool the drive controller, a built-in air blower draws and expels ambient air from below and above. The model weighs 1.30 kg and has a basic control section. The HCS01.1 drive controller features a multi-ethernet connection module and can operate at temperatures as high as +40 degrees Celsius without performance degradation.

The HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-AW model has a maximum current rating of 8 A and is based on cutting-edge motion control technology developed by Rexroth Indramat. A three-phase power supply device with an input voltage range of 200 to 500 V AC powers the principal connector. When the appropriate Rexroth components are used, the performance of the drive controller reaches its maximum level. The supplied electrical frequency must be 50/60 Hz with a tolerance of 2%. The model (HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-AW) has a multi-encoder interface 1 and a 2.5 amp current input rating.