Product Description
The Bosch Rexroth HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW is a drive controller. Its maximum current output is 8 Amps. The controller is designed for three-phase AC input. The operating voltage range is 200 to 500 Volts AC. The cooling method is forced-air cooling and the required hourly air-flow rate is 56 m3. The permitted ambient temperature for operation with rated output is 0 to 40 degrees Celsius. Bosch does allow derated HCS controller operation at temperatures ranging from 40 to 55 degrees Celsius. HCS controller operation at temperatures exceeding 55 degrees Celsius is not permitted. HCS controller support multiple switching frequencies. The allowed switching frequencies for the HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW are 4, 8. 12 and 16 kilohertz. The power dissipation at continuous current and continuous DC bus power is 85 Watts. Bosch does not require horizontal spacing for the controller.
However, Bosch does recommend minimum 90 millimeters spacing at the top and bottom sides of the installed controller. The HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW is a controller that is based on control section from the basic category. It supports Multi-Ethernet communication. In addition it also features an integrated multi-encoder interface. Plug-in modules installed on the HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW include a safety module and engineering port module. The safety module supports safe motion bus. The control panel supplied with the HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW is an advanced control panel. Using the four-button keypad, a service technician can have extended diagnoses displayed and trigger simple commands. The control panel has 2 MB flash memory for data, 16 MB flash memory for code, and 32 KB FRAM memory for data. Like all HCS series devices, the firmware for the HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW is ordered separately. The IP20 rated HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-AW is designed for control cabinet mounting.
Wake Industrial Warranty
