Product Description
The HCS01.1E-W0008-A-03-B-ET-EC-EP-NN-NN-FW is an advanced industrial controller. With a compatible motor, it can be used for applications such as printing and paper-converting machines, handling systems, mounting systems, and food machines. The power supply on the unit is of the ‘feeding’ type. Bosch provides different control sections for HCS controllers that differ in supported features and capabilities. The control section on the HCS01.1E-W0008-A-03-B-ET-EC-EP-NN-NN-FW is a basic control section. Maximum current at the controller output is 8 Amps. The input voltage range is 200 to 500 Volts AC (three-phase). The controller cools via forced ventilation. The volumetric capacity of forced cooling is 56 m3/h. The inlet for the cool is located at the bottom of the unit. The outlet for the heated air is located at the top of the unit.
The ambient temperature range for operation with nominal data is 0 to 40 degrees Celsius. Temperatures between 40 and 55 degrees Celsius permit operation with derated data. The HCS01.1E-W0008-A-03-B-ET-EC-EP-NN-NN-FW supports integrated Multi-Ethernet communication. It also features an integrated multi-encoder interface and an optional module with an engineering port. The slot for a safety module on the HCS01.1E-W0008-A-03-B-ET-EC-EP-NN-NN-FW is vacant. HCS controllers support standard and advanced control panels. The HCS01.1E-W0008-A-03-B-ET-EC-EP-NN-NN-FW controller is supplied with a standard control panel. While the advanced control panel supports hot plug, the standard control panel does not. Therefore it must be connected to the controller before power on. A major portion of the controller functionality depends on the installed firmware. Bosch develops different firmware that are optimized for different applications. To ensure that firmware matches the customer applications requirements, Bosch requires a separate order for the firmware. Only qualified personnel should handle and operate the drive controller.
Wake Industrial Warranty
