HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW

Product Description

The Bosch Rexroth HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW is a digital drive controller. Each HCS drive controller has the following four major components: a control section, a power section, a control panel and firmware. The control section is responsible for information storage and processing. The HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW is equipped with a basic control section. The power section accepts AC input and converts it into DC power that is used by the electronic components that make up the controller. The power section on the HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW controller is designed for 200 to 500 Volts AC input. The control panel allows controller programming and monitoring. The HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW works with a standard control panel that attaches to the front of the unit. Operators must connect the standard control panel to the HCS controller before power on. It is equipped with a digital single-line display and a four-button keypad. The controller firmware is ordered separately.

Maximum output current that the HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW can deliver is 8 Amps. The full rated output is only possible if the controller is operated under ambient conditions specified by Bosch. The ambient temperature that allows controller operation with rated values is 0 to 40 degrees Celsius. The installation site elevation that allows controller operation with rated values is 0 to 1000 meters. The HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW comes in an IP20 rated housing designed for vertical mounting inside an industrial cabinet. Suitable spacing between devices in the same cabinet is essential for smooth airflow. The HCS01.1E-W0008-A-03-B-ET-EC-CN-S4-NN-FW releases heated air inside the cabinet. Therefore large cabinets are required to maintain adequate spacing between heat-generating devices. The controller supports several features including Multi-Ethernet and CANopen communication, a multi-encoder interface, and safe motion. The controller height is 215 millimeters and its width is 50 millimeters.