HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW

Product Description

The HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW is a modular drive controller. It belongs to the IndraDrive product line from Bosch Rexroth. HCS controller applications include mounting systems, handling systems, printing machines and machine tools. The HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW belongs to the size 1 category: its width is 50 millimeters and its height is 215 millimeters. The mains connection voltage is 200 to 500 Volts AC (three-phase). Maximum output current delivered by the controller is 8 Amps. Each HCS controller has four components that include a power section, a control section, firmware and control panel. The control section on the HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW is advanced. The control panel supplied with the unit is a standard control panel. All HCS controllers are equipped with a multi-encoder interface that is compatible with encoder systems rated for 5 / 12 Volts.

The HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW is also equipped with Multi-Ethernet communication. Three slots on the controller are vacant. Operators can install hardware modules of their choice to match the controller to their requirements. One of the slots is reserved for a safety module. The HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW comes in an IP20 rated enclosure designed for cabinet mounting. Bosch recommends attaching the backside of the controller to the mounting surface. In case there is insufficient space between the front of the cabinet and the cabinet wall, operators can mount the controller by attached either the right side or the left side of the unit to the mounting surface. Braking resistors at the back of the HCS01.1E-W0008-A-03-A-ET-EC-NN-NN-NN-FW can get very hot during operation. Operators must ensure that there is sufficient space between the backside of the controller and any heat-sensitive materials. Only trained and qualified personnel should be allowed to install and operate the controller.