Product Description
The HCS01.1E-W0008-A-03-A-CC-EC-EM-L3-NN-FW drive controller can function like a secondary servo drive. The Bosch Rexroth controller uses a Hall sensor adapter box to operate an MCL linear motor with a digital Hall sensor. This product incorporates encoder emulation and encoder evaluation. The device supports Ethernet-based communication with its SERCOS III interface. This unit is meant to be utilized after the prerequisites for its appropriate use are met. It is needed to implement additional interference suppression measures when it is operated in a mains for residential areas. The controller is meant to be mounted only in G1 orientation. This product has IP 20 degree of protection in accordance with IEC 529 specifications.
The device depicts dangerous movements at any point in time if the connected motor has any fault. This unit may cause personnel injury if its batteries or pressurized lines are handled improperly. It is one of the several HCS series of drive controllers. The controller has no components with any harmful materials that have a negative influence on the environment. This product as well as its components cannot be operated near high-frequency equipment. The device is meant to be cooled down for a stipulated time after its power has been disconnected. This drive controller global dispatch is done with a warranty duration of one year.
The product handling and mounting can be done using only suitable equipment. This unit has to be operated with a third-party motor only after checking if the motor satisfies the voltage loads. Its batteries must be replaced without damaging its electrical parts. The controller causes lethal electric shock when there is contact with live parts that have above 50V voltage. This product has a III overvoltage category in accordance with IEC 60664-1 specifications. The device mounting should be carried out in a control cabinet with filters at the air intake opening to avoid the entry of unclean air.
Wake Industrial Warranty
