Product Description
The HCS01.1E-W0008-A-03-A-CC-EC-EC-NN-NN-FW drive controller produced by Bosch Rexroth incorporates no safety technology. This controller controls the holding brake of a motor. The product may pose a health hazard to people with passive metallic implants. This device causes a risk of injury due to actions like hitting, cutting, shearing and crushing. The unit is UL Listed as well as CSA Certified. It uses batteries to support the operation of its control panel. This controller makes use of an advanced control section. The product portrays a mains connection voltage of 3 x 110 VAC to 230 VAC. This device has the ability to function like a converter.
The controller operation with third-party motors is permissible only after making sure that they comply with the requirements of use. This unit is associated with four possible pulse width modulation frequencies. Its firmware is meant to be procured as a separate subitem. The product cannot be used outside a closed housing or a control cabinet. This device might get damaged because of unclean air in the control cabinet. The unit is fitted onto the closed housing by standard, right-hand or left-hand mounting. It cannot be mounted in a horizontal orientation. This drive controller portrays a backup support period of one year.
The controller has a SERCOS 3 master module for cross-communication. This product comes equipped with a Bb relay contact that has to be included in the switch-off chain of the mains contactor. The device and its components get damaged because of customer-side testing of the installation or machine. This unit comes along with the associated mounting and connection accessories. It must never have any icing or moisture condensation on its surface during operation, storage and transportation. The controller must comply with the specified minimum distances for mounting. This drive controller delivery is undertaken by reputed freight carriers.
Wake Industrial Warranty
