Product Description
The Bosch Rexroth HCS01.1E-W0008-A-03-A-CC-EC-DA-NN-NN-FW drive controller is an integral part of the manufacturer’s drive system. This controller helps the motor execute the application-related functions only if it is programmed prior to the commissioning. The product is put to use in packaging, food, printing and paper processing machines. This device operation is allowed only under manufacturer-specified assembly and installation conditions. The unit is to be used in residential areas with public low-voltage mains only after ensuring additional interference suppression measures. It has a 14-bit analog input with a +/-10V voltage rating. This controller has two options to buffer the data from an MSM encoder.
The product must adhere to the safety requirements and regulations of the country in which it is used. This device switching-on action can be done only after its guards and covers have been installed. The unit depicts protection against penetrating water and foreign objects by the related control cabinet. Its connectors can neither be removed nor plugged in when it is in the ON state. This controller shows signs of dangerous movements because of a problem like defective components with the connected motor. The drive controller is available with a year’s Wake Industrial warranty.
This product takes close to 15 minutes to cool down after it is switched off. The device handling should be done by observing accident prevention=related statutory regulations. This unit must make use of only the battery types specified for its control panel. Its digital inputs/outputs interface is connected at the X37 connecting point by a spring terminal and a connector cable featuring stranded wire. The controller installation is allowed only inside a control cabinet with interference suppression measures for relays and contactors. This product and the related motor are to be connected using only shielded power cables. This drive controller shipment is done to any global destination.
Wake Industrial Warranty
