HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW

Product Description

The HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW drive controller features 1 design code. This Bosch Rexroth drive controller must be dismounted only after its pressure has been released. The product can be made to work only with a third-party motor that complies with the requirements of use. This device must have a continuous current rating that is higher than the continuous current rating of the motor. The unit uses a motor cable of length 40m if its PWM frequency is 4kHz. Its operation should be done with plugged-on connectors. This controller comprises electrolytic capacitors in some components that may get damaged during the storage period.

The product placement is to be done at a distance from adjacent equipment in the associated control cabinet. This device has braking resistors that become very hot during operation. The unit is fitted to the control cabinet with mounting screws that have 6Nm tightening torque. Its rear is mounted directly onto the mounting surface with back-side mounting by fixing the screws to the back panel. This controller encompasses adhesive labels with safety notes on its sides. The product must have an equipment grounding connection with a copper wire of at least 10mm² cross-section. This drive controller comprises a warranty for one year.

The device is meant to be used at a temperature ranging from 0°C to 40°C. This unit must comprise strain relief for its terminal connectors inside the control cabinet. Its X3 connecting point has a terminal block with three terminals for connection to the mains power supply. The controller features connections for monitoring the motor temperature at the X6 connecting point. This product must never be installed in the horizontal orientation. The device allows the integration of several Ethernet field bus systems. This unit can be accessed only after half an hour of turning it off. This drive controller shipment is done in custom military-grade packaging.