HCS01.1E-W0006-A-02-B-ET-EC-EC-L4-NN-FW

Product Description

The HCS01.1E-W0006-A-02-B-ET-EC-EC-L4-NN-FW drive controller manufactured by Bosch Rexroth along with the connected motor forms an integral part of a drive system. This drive controller must have sufficient clearance above and below it inside its control cabinet. The product has to be free of combustible materials above it. This device has an air inlet at the bottom and an air outlet at the top. The unit is designed to support only the G1 mounting position without the generation of heat pockets. Its firmware must be bought as a separate subitem. This controller uses a multi-Ethernet module for communication. The product has a power requirement of 12.7W.

This device has more than a 3.5mA leakage current. The unit allows the inclusion of a residual current-operated circuit breaker if the motor cable is shielded and has more than 20m in length. It has 2 degree of pollution as per EN 50178 specifications. This controller is associated with clock frequencies of 4kHz, 8kHz, 12kHz and 16kHz. The product is designed using materials such as steel, copper, aluminum and other synthetic materials. This device can cause electric shock if contact is made with its live parts that have more than a 50V voltage rating. The unit comprises a type plate attachment on its housing.

This controller is to be installed, mounted, transported and stored properly for safe and optimum operation. Its multi-Ethernet module has multicolor diagnostic LEDs and two unicolor port LEDs. The product has an IP 20 degree of protection. This device comes along with the required accessories for connection and mounting. The unit is a good choice for use in machine tools. Its control panel incorporates a programming module function. This controller houses a multi-encoder interface for encoder evaluation. The product is sized at 50 x 215 mm (W x H). This drive controller with one-year backup support is shipped globally.