Wake Industrial LLC is not an authorized distributor of this product.

HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW

  • Rated 4.4 (15 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911331031

Current response time:

4 Minutes 52 Seconds

The HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW Compact Converter is manufactured by Rexroth Indramat Bosch. This converter has an Internal Air cooling mode and a 5 AA Maximum Current. This compact converter also comes with a AC 200 to 500v +- 10% Connection Voltage.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The Bosch Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW drive controller installation has to be de-energized and protected against getting turned ON again before working on its live parts. This controller depicts a DC bus connection with a touch guard that must be taken off to plug the bus connector. This product can be integrated with various Ethernet field bus systems. The device uses X24 and X25 connecting points complying with IEEE 802.3 standards for the multi-Ethernet module connection. The unit operation without the DC bus connector is prohibited at any point in time. Its housing must be grounded by observing the maximum ground resistance permitted.

The controller and the motor encoder are connected at the X8 connecting point using a 0.25mm2 to 0.5mm2 connection cable with stranded wire and a male D-Sub 15-pin connector. The product implements no safety technology. The device should have a considerable clearance distance at the bottom and top within the control cabinet. This unit comprises a power supply with an output voltage ranging between 5V and 5.25V as well as a maximum output current rating of 500mA. It is possible to establish both direct and indirect connections of the DC buses of several controllers. The indirect connection is achieved using connecting bars.

The product depicts a depth of 196mm. The device houses a PROFIBUS interface with a TTL-compatible repeater control signal. The device encompasses digital inputs and outputs adhering to IEC 61131 specifications. The Type A standard digital inputs have a current consumption between 2mA and 5mA as well as an input voltage ranging between -3V and 30V. The unit uses high-side switches for the realization of its digital outputs. Its power supply can be switched OFF through the firmware. This product needs shielded cables for connecting its analog voltage input if the cable length is more than 30mm. This HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW controller is available for international shipping with backup support for a year from Wake Industrial.

  • HCS011EW0005A03BETECPBNNAAFW
  • HCS01 1E W0005 A 03 B ET EC PB NN AA FW
  • hcs01.1e-w0003-a-02-e-s3-ec-nn-l4-nn-fw
  • HCS1.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW

HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW Technical Specifications

Connection Voltage: AC 200 to 500v +- 10%
Cooling Mode: Internal Air
Maximum Current: 5 A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo