HCS01.1E-W0005-A-03-B-ET-EC-PB-L4-NN-FW

Product Description

The HCS01.1E-W0005-A-03-B-ET-EC-PB-L4-NN-FW drive controller produced by Bosch Rexroth comprises a PROFIBUS interface for command communication. This controller utilizes a 3 x 200VAC to 500VAC mains connecting voltage. The product helps to control as well as monitor the operation of an electric motor. The device weighs 1.3kg. The unit has to implement additional measures for interference suppression when it is used in residential areas. Its associated documentation has to be read and understood properly before it is used. The controller has live capacitors that require to be discharged before touching it after its operation. The product is to be brought to standstill mode before entering the danger zone.

The device needs up to 15 minutes for its cooling after turning OFF the power supply. The unit comprises a slot to insert a microSD memory card. It cannot be used outside closed housing. The controller needs to be operated with DC voltage for at least an hour once a year when it is stored for a long period. The product storage must be executed from -20°C to 55°C. This device is designed to be mounted using back-side mounting with its back attached to the mounting surface of the related control cabinet. This unit requires two M6 x 20 screws for control cabinet mounting. It comprises a Bb relay contact.

The controller has separate connecting points for digital as well as analog inputs and outputs. The product does not support use for even a minimum time without a proper grounding connection. The device utilizes its X5 connector for the power connection at the motor. The unit features digital inputs with a maximum 0.01A input current rating and 24V input voltage rating. These digital inputs are also associated with a reference potential. This controller with its one-year backup support can be sent to any global address through trustworthy sources.