Product Description
The HCS01.1E-W0005-A-03-A-ET-EC-NN-L4-NN-FW is an electrical converter produced by Rexroth Indramat to accurately control the position, speed, and general operation of industrial synchronous, asynchronous and linear motor. This converter is manufactured according to internationally acceptable standards. Before it is sent to the end user, it is tested and certified to operate according to the technical data stated in its documentation. The HCS01.1E-W0005-A-03-A-ET-EC-NN-L4-NN-FW is a modular device that meets the IP20 protection class. However, since its housing unit can only provide protection against solid materials with an external diameter larger than 12 millimeters, industrial operators should ensure the converter is installed into a control cabinet that can provide minimum protection that meets the IP54 protection class.
The HCS01.1E-W0005-A-03-A-ET-EC-NN-L4-NN-FW industrial converter is widely renowned for its ability to completely control the operation of industrial motors over a broad speed range. This makes it perfect for industrial operators that handle a wide range of industrial machines such as metal forming machines, robotic machines, food processing machines, and lots more. The heat generated by this industrial motor controller can be easily regulated via natural convection. However, this temperature regulation process can be supported by installing the converter into a position that exposes it to cool air.
The HCS01.1E-W0005-A-03-A-ET-EC-NN-L4-NN-FW industrial motor controller requires an input current of about 5 amperes and a main connecting voltage that falls between 200 to about 500 volts. Also, during operation, this controller can generate a leakage current of about 3.5 milliamperes. This makes it very important for industrial operators to ensure that that controller is properly grounded before it is switched on for operation. Also, the permissible ambient temperature suitable for this controller falls between 0 to about 45 degrees Celsius.