Product Description
Bosch Rexroth prioritizes customer satisfaction, as seen by the high quality of its distributed drive controllers, servo drives, brake resistors, synchronous motors, electronic amplifier cards, and frequency converters. These things are often utilized in a range of automated companies.
The HCS01.1E-W0005-A-03-A-CC-EC-NN-L4-NN-FW model has a master SERCOS cross-communication module and a maximum current rating of 5 A. The communication module is necessary to send parameters to the drive controller. Often, parameter transfer occurs between the master and the driver. The HCS01.1 drive controller is 1.30 kg in weight and has a multi-encoder interface 1. This model's input current rating is 1.5 A, and its IP 20 certification offers particle protection. It must, however, be housed in a control cabinet that offers adequate environmental protection. Provide enough ventilation and a 90-millimeter air gap between the top and bottom of the model. The model's transport temperature range is -25 to +75 degrees Celsius, and its output current rating is 1.7 A. The HCS01.1 drive controller has an STO (Safe Torque Off) and SBC (Safe Brake Control) interface 3 and has small dimensions (50 mm x 196 mm x 215 mm) (W x D x H) to allow quick assembly and accurate positioning.
The model HCS01.1E-W0005-A-03-A-CC-EC-NN-L4-NN-FW has an insulating resistance of 10 Mohm and requires a mains connection voltage of 200 to 500 volts with a 10% tolerance. The drive controller must be mounted in the G1 position and is intended to be cooled by a blower/fan with integrated pressurized air. It is required to remove dust and other impurities from the entering air. The drive controller (HCS01.1E-W0005-A-03-A-CC-EC-NN-L4-NN-FW) was designed by the manufacturer to operate between 0 and +40 degrees Celsius.
Wake Industrial Warranty
