Product Description

The HCS01.1E-W0003-A-03-E-S3-EC-NN-NN-NN-FW is a versatile drive controller from the house of Bosch Rexroth. The device features a maximum current of 3 A. Its mains supply voltage is 3 x AC 200 to 500 V with a tolerance of +/- 10%. The unit is equipped with an infeed power supply. Before the mains voltage or the DS bus voltage is applied to the parts, they need to be supplied with the 24 V supply. The degree of protection of the product is IP 20. The motor cables should be kept as short as possible. This is because only short motor cables allow low leakage currents, eventually enabling residual-current-operated circuit breakers to function. The drive controller should be operated under the installation and assembly conditions specified in the product documentation. The specified positions and the ambient conditions must be observed. Before the user accesses electrical parts with voltage potentials of more than 50 V, they should disconnect the electric components from the power supply unit. The electric components should be secured from reconnection. When the power is turned on, the electric connection points of the parts of the device should never be touched. Also, connectors should not be removed or plugged in when the unit is live. The HCS 01 drive controller features a control panel with a programming module function. The unit should be mounted within a control cabinet. The device can be protected against conductive dirt contamination in the control cabinet by mounting it with a degree of protection of IP54 according to IEC529. The rated installation altitude of the product is 1000 meters above mean sea level. The relative humidity of the device should be maintained between 5 and 95% without condensation.