HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW

Product Description

The HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW drive controller has no safety technology. The Bosch Rexroth controller features its digital inputs/outputs connection at the X37 spring terminal connector. The product releases no hazardous substances with appropriate use. The device voltage must be less than 50V before touching its live parts for maintenance or repair. The unit must portray the control panel connection when it is turned ON for it to be recognized. Its analog output has a resolution of 24 bits. The controller features overload protection for its analog current input. This product comes along with a PROFIBUS interface that has a signal voltage rating of +5V +/-10%.

The device features integration with a Multi-Ethernet module comprising two unicolor port LEDs and a multicolor diagnostic LED. This interface supports all standard encoders. The controller incorporates signal scalable processing. The unit is capable of buffering the encoder-related data using the manufacturer’s encoder cables or a battery box. Its digital inputs are realized using high-side switches. The product portrays an inbuilt functionality for measuring and monitoring the current of the motor holding brake. This device features an engineering port on its front panel. The unit supports both single-phase as well as three-phase operations. This HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW controller has a warranty for a year.

The drive controller supports five types of firmware. The product poses a risk of adverse consequences if it is operated without reading the safety instructions. The device installation is not permitted in a faulty state. The unit operation is allowed only with the intended firmware. It can cause interference when operated in residential areas without deploying interference suppression measures. This product might cause bodily injury due to handling its pressurized lines improperly. The device connectors must neither be disconnected nor connected when the power supply is ON. The unit has high housing voltage and leakage current with unintended use. It is possible to have the controller sent to its destination through freight carriers with a worldwide presence.