Product Description
The HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW drive controller offered by Bosch Rexroth has 24V +/-20% rated control voltage input. This controller can operate like a frequency converter if needed. The product supports parallel connection with other drive controllers of the same type. The device has separate type plates for its control panel and firmware. The unit transportation takes place at a temperature ranging between -20°C and 70°C. Its components contain electrolytic capacitors that deteriorate under storage. This product encompasses breaking resistors that become very hot during operation at its rear. The device must depict immediate contact with the wall of the control cabinet with right-hand or left-hand mounting.
The drive controller uses two M6 x 20 screws with 6Nm tightening torque for fixing the wall of the control cabinet. The product weighs 1.3kg. The unit is sized at 215 x 196 x 50 mm (H x T x B). The device features an equipment grounding connection comprising a copper wire with at least an 8 AWG cross-section. The unit has a 01 series code. It has three terminals on the terminal block for connecting to the mains power supply. The controller and the motor are connected through the X5 connecting point. This product features 42000A short circuit current rating. This HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller has backup support for one year.
The device supports integration with various Ethernet Fieldbus systems because of the multi-Ethernet communications module. The module features 100Base-TX compatibility according to IEEE 802.3u standards. The controller has seven digital inputs of which two inputs can be configured as probe inputs. The product is to be de-energized and secured against re-energization before working on any of its live parts. This device comprises a 24V voltage that is supplied externally by means of the X13 connector. This connector has polarity reversal protection within the permitted range because of an internal protective diode.