Product Description
The HCS01.1E-W0003-A-02-B-ET-EC-NN-L3-NN-AW industrial converter is a durable and unique industrial device designed by Rexroth Indramat to control the operation of a wide range of industrial motor series by adjusting the electrical current, voltage and frequency supplied to the motor through the power cable. This industrial converter is designed to contain a combination of old trusted designs and some of the latest industrial innovations. It also features a modular housing unit that is specially structured to provide protection according to the IP20 protection class. Before this industrial converter is supplied to the industrial operator, it is tested and certified to meet international standards. It is also fitted with type plates that contain important identification information about the converter. Information present on the type plate attached to this converter during delivery includes the hardware index, device type, part number, factory identifier, bar code, and serial number.
The HCS01.1E-W0003-A-02-B-ET-EC-NN-L3-NN-AW industrial converter is unlike conventional industrial machines, as it is designed with a user-friendly automation panel through which industrial operators can accurately interact with the converter in real-time. Before this industrial converter is supplied to the industrial operator, it is tested and certified to meet international standards; it is also fitted with type plates that contain important identification information about the converter. Information present on the type plate attached to this converter during delivery includes the hardware index, device type, part number, factory identifier, bar code, and serial number.
The input voltage required by the HCS01.1E-W0003-A-02-B-ET-EC-NN-L3-NN-AW converter during operation is about 24 volts ±20%, however, when the controller is being used with an electric motor connected to a motor holding brake, the input current required by the converter can be as high as 24±5%, to about 26 volts. At a nominal input voltage, this controller also operates with an input current that is about 3.30 amperes. To prevent electrical accidents that can be caused by the leakage current generated during the operation of the motor, it is important for industrial operators to ensure that the motor is properly grounded before operation.
Wake Industrial Warranty
