Product Description
The FVCA01.1-30K0-3P4-MDA-LP-P002-01V01 Bosch Rexroth frequency converter comes with a 0.00Hz frequency command. The frequency command setting can be changed using the operator panel. This product is meant to be powered ON only after ensuring that its plastic enclosure is in place. The device may fail to operate the motor because of incorrect parameters. The unit is supposed to be commissioned only after ascertaining that its U, V, and W output terminals have no connection to the power supply. It can start rapidly by setting the parameters depending on the specifications and application loads with the help of its operator panel. The converter has a power rating of 30kW.
The sequence of any two phases of the U, V, and W terminals of the converter can be changed if the motor runs in the opposite direction. The product should neither be started nor stopped using the KM electromagnetic contactor. The device encompasses a Class C3 filter for use in industrial environments. Its control commands can be set using the Run, Jog, and Stop operating panel keys. The unit shuts down output when the stop command is triggered. The converter helps in the adjustment of the speed dynamic response characteristics related to the vector control. We can dispatch the FVCA01.1-30K0-3P4-MDA-LP-P002-01V01 frequency converter through our logistics partners such as FedEx.
The converter supports a relative humidity of 5% to 95% during operation, storage, and transport. The product features electrolytic capacitors in some components. These may get damaged if stored for long. The device is a part of the manufacturer’s Fv drive system that also includes a brake unit, a brake resistor, as well as an adapting interface, and operating panel cables. The firmware features a release status code of 01. This unit has an overload capacity of 150% of the rated current for a minute. The frequency converter has a one-year Wake Industrial warranty.
Wake Industrial Warranty
