FVCA01.1-22K0-3P4-MDA-LP-P001-01V01

Product Description

The FVCA01.1-22K0-3P4-MDA-LP-P001-01V01 frequency converter made by Bosch Rexroth must use cables with 0.3mm² to 1mm² cross-section for wiring its control circuit. These cables must be tightened using screws that have 0.8Nm torque after insertion into the terminals. The dimensions of the fuse and power cables of the product are in compliance with VDE 0298 Part 4 specifications. The device is equipped with a Class C3 EMC filter for use in industrial environments. It can be operated by pressing its Run button in the operator panel. The display of the operator panel highlights its operation state and mode settings.

The function button of the converter is used to switch between the display and menu. The output terminals of the product must not have a connection to the power supply. The device gets energized when there is a connection to the main power supply. The unit must be powered ON only after ensuring that the plastic enclosure is in position. It shows overcurrent as soon as the Run key is pressed if the wiring is incorrect. The acceleration time 1 and deceleration time 1 parameters of this converter are modifiable in Run or Stop mode. The FVCA01.1-22K0-3P4-MDA-LP-P001-01V01 device is associated with a warranty that is valid for one year.

The LCD of the product highlights several parameters such as output frequency, power, current, voltage, and rotation speed; DC bus voltage, set output frequency, and rotation speed, and more in Run mode. The device does not support copying or modification of parameters if a wrong parameter is entered. The backlight of its unit turns OFF automatically if there is no keypress for 80 seconds when the energy-saving setting is activated. The b0.13 parameter of the converter displays its total running time. This converter can be transported in custom military-grade packaging to avoid damage during transit.