Product Description
The Bosch Rexroth FECP02.1-37K0-3P400-A-BN-MODB-01V01 frequency converter must be put to use only with accessories and spare parts that have the manufacturer’s approval. The product should not be operated in a damaged or faulty state. The device is not intended to support operation under water. This unit must be equipped with sufficient ventilation to avoid overheating when in use. It encompasses a RS 485 interface for serial communication. This converter does not have any PI and PB terminals. The converter is to be checked for short circuits between terminals and ground or wires after the wiring connection is established. The product must never feature a radio noise filter, surge suppressor or power capacitor on its output side.
The device may have to be fitted with a radio or line noise filter on the input side to minimize interference. Its wiring changes should always be performed only after the power supply is disconnected so that the DC circuit capacitor gets discharged completely. The unit is positioned between an AC filter and an AC output choke. The converter uses gR type fuses for protecting the supply conductors in its input side. The product has 75A continuous rated current. This device experiences a 1% deration of output power for every 100m increase in installation altitude above 1,000m. The unit is meant to be used in its original state without any hardware modification.
The product is supposed to be transported between -25°C and 70°C. The device depicts 2K3 climatic category during transport and storage as per IEC 721 specifications. The unit comes with an output frequency ranging from 0Hz to 650Hz. Its H36 parameter can be used to set the dynamic braking point. The converter portrays one relay output with 250VAC/30VDC voltage rating and 3A current rating. The FECP02.1-37K0-3P400-A-BN-MODB-01V01 product can be transported to your address through well-known shipping partners with a warranty tag for one year.
Wake Industrial Warranty
