Product Description
The Bosch Rexroth FECP01.2-110K-3P400-A-BN-NNNN-01V01 is an industrial frequency converter. According to the product type code, the line is 1 and the design is 2. The power output rating of the converter is 110 kilowatts. The FECP01.2-110K-3P400-A-BN-NNNN-01V01 is designed for 380 to 480 Volts AC input (three-phase, 50 to 60 Hertz). The nominal motor voltage range is three-phase 0 to mains voltage. The continuous current rating of the converter is 223 Amps. The range of frequencies at the converter output is 0 to 650 Hertz. The FECP01.2-110K-3P400-A-BN-NNNN-01V01 is designed for pump control applications. It can sustain output overloads of 105% for 1 hour or 120% for 1 minute. The optimal environmental conditions for operation include altitude of up to 1000 meters, less than 90% relative humidity and –10 to 40 degrees Celsius operating temperature.
The operating panel on the FECP01.2-110K-3P400-A-BN-NNNN-01V01 is large and does not feature a potentiometer. The converter enclosure is IP20 rated: it offers limited protection from solids but does not offer protection from liquids. Therefore the converter should be mounted inside a suitable control cabinet. The operating environment should be free of corrosive gas, liquids of dust. Only vertical mounting of the FECP01.2-110K-3P400-A-BN-NNNN-01V01 is allowed. The recommended minimum clearances are: 150 millimeters on the bottom and top sides, and 50 millimeters on the right and left side. The approximate weight of the FECP01.2-110K-3P400-A-BN-NNNN-01V01 converter is 96.5 kilograms. The approximate converter dimensions are 850 x 570 x 360 millimeters. Size M10 screws are required for mounting of the converter. The RS-485 port on the FECP01.2-110K-3P400-A-BN-NNNN-01V01 can be used for master-slave communication. Only properly trained and qualified technical personnel should install and operate the device. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
