Product Description
The FECG02.1-0K75-3P400-A-SP-MODB-01V01 frequency converter has an analog frequency setting tolerance of 0.05%. The Bosch Rexroth converter incorporates automatic energy-saving and automatic PWM frequency adjustment functions. This product encompasses a status LED that highlights the operating status and rotating direction. The device must at no time have any condensation on its surface. The current of the unit is reduced if it has a high pulse frequency so that the power dissipation in the associated power section is more or less constant. The converter portrays a rated power of 0.75kW. The product uses capacitors in its DC bus to store energy.
The converter comes associated with a read-only register that helps to monitor its state. The device features a voltage dip of less than 50V within a maximum of 30 minutes discharging time after the supply voltage has been cut OFF. The unit has 400V mains connecting voltage. It has a small size control unit with a potentiometer. The operating panel used with the product is mounted on the control cabinet. The device is connected to the RS 232/485 adapter using a 5-meter long cable. The unit uses an external braking resistor to prevent overvoltage. This converter is transported using custom military-grade packaging to prevent transit damages.
The product is equipped with the ability to support fast load deceleration as well as increased braking without overvoltage trips by means of its internal brake chopper. This device implements an EMC filter to lower mains pollution and radio interference. The signal and control lines of the unit must run at a distance of at least 100mm from the power cables to avoid interference. Its motor encoder and power cables must be routed along grounded metal surfaces to lower the radiation due to interference fields. This frequency converter has warranty support for a period of one year.
Wake Industrial Warranty
