Product Description
The FECG01.2-75K0-3P400-A-BN-NNNN-01V01 frequency converter manufactured by Bosch Rexroth features a line code of 01. This product incorporates a high overcurrent carrying capacity. The device is designed for U/f operation. It may cause personal injury and property damage if it is used inappropriately. The unit is loaded with a standard full version firmware with a release status code of 01. The converter is intended to be used for control cabinet mounting. This product is associated with a permissible relative humidity of less than 90%. The device must not have moisture condensation and icing on its surface at any point in time. It has a 2K3 climatic category as per IEC 721 specifications during transport and storage.
The components of this converter are tested with high voltage. The product is UL Listed and CE Certified. The device must always be installed upright so that its cooling is not affected. One unit can be mounted on top of another without exceeding the limit of air temperature into the inlet. Its signal connection wiring is done using flexible cables with wire end sleeves. This frequency converter is equipped with an operating panel in the middle. This panel primarily comprises keys and a display. The FECG01.2-75K0-3P400-A-BN-NNNN-01V01 converter is eligible for international shipping to your choice of destination with the one-year warranty backup.
The product does not have any potentiometer with a standard configuration. The mechanical and electric installations of the device have to be checked before it is started. The converter is capable of recording why the last four faults occurred. The unit uses a standard RS 485 port for communication. It houses two programmable analog multi-function outputs. The analog common GND terminal is isolated from the COM terminal. The panel features an LED display. This converter is integrated with drooping control and jogging control functionalities. The unit has one relay output.
Wake Industrial Warranty
