Product Description
The FECG01.2-2K20-3P400-A-SP-NNNN-01V01 frequency converter offered by Bosch Rexroth portrays a speed regulation range of 1:100. The output frequency of the product ranges between 0Hz and 300Hz. The device supports flexible auxiliary frequency trimming and frequency synthesis. The unit has 3 x 400VAC rated input voltage. It must be ensured that there is no dust, dirt and/or corrosive gas or liquid in the area surrounding the converter where it is operated. The converter should have a shielding conductor for its speed control terminals. The operation of the product can be stopped using the Stop key on its operating panel. This key can also be used to reset a fault.
The input lead switch of the device encompasses a circuit breaker with 2.2A current rating. The unit uses a brake resistor with minimum 200 Ohms resistance and 800W braking power. The converter may have a very hot surface during operation. The H02 parameter is used to reset the product after a power failure. The device is meant to be used only in applications that are specified by the manufacturer. One unit can be installed above another with adequate clearance between them.
The converter has a 2K3 climate category during transport and storage as per IEC 721 specifications. The starting torque of the product can reach 150% of the rated torque at 50Hz. The device can maintain a constant output voltage even when the input voltage changes due to its automatic voltage regulation function. It features protection against multiple parameters such as overcurrent, overload, overvoltage, overheat and undervoltage. The unit has an apparent power of 4kVA and 4A rated current. The product houses an optical isolator on its open collector outputs. This frequency converter comes with a warranty for a year and is shipped through a trustworthy vendor network.
Wake Industrial Warranty
