Product Description
The Bosch FECG01.1-5K50-3P400-A-SP-NNNN-01V01 is a G-type Fe series frequency converter. G-type converters are designed for general automation applications. The Fe series also includes P-type converters that are suited to pump applications. According to the product type code, the product is FECG, the line is 1 and the design is also 1. The rated power output is 5.5 kilowatts. The rated input is 400 Volts AC (three-phase, 50 to 60 Hertz). The rated input current is 17 Amps. The rated apparent power is 8 kVA. The IP20 rated converter housing is designed for vertical mounting. The minimum spacing recommendation for mounting are as follows: 50 millimeters on either side and 150 millimeters above and below. The installation should ensure that heated air from lower converters does not enter that air inlet of upper converters. Bosch has allowed the used of baffle plates for this purpose.
The small control panel on the FECG01.1-5K50-3P400-A-SP-NNNN-01V01 includes a potentiometer. The version of the standard firmware loaded on the converter is 01 and the release of the firmware is 01. Optional accessories for the FECG01.1-5K50-3P400-A-SP-NNNN- 01V01 include operating panel for control cabinet mounting, Profibus adapter module, RS-232 / RS-485 adapter module, motor filter, mains choke, brake resistor, brake chopper and engineering software. Only accessories that are approved by Bosch are allowed to be used with the FECG01.1-5K50-3P400-A-SP-NNNN-01V01. The leakage current for Fe converters depends on design, ambient conditions, motor power and cable length. Bosch recommends the use of a B-type breaker for ensuring normal converter operation. The leakage current for the FECG01.1-5K50-3P400-A-SP-NNNN-01V01 is greater than 10 milliamps. Weight of the FECG01.1-5K50-3P400-A-SP-NNNN-01V01 is 3.5 kilograms. Dimensions of the unit are 220 x 125 x 176 millimeters. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
