Product Description
The FECG01.1-55K0-3P400-A-BN-NNNN-01V01 is a Bosch Rexroth frequency converter that is designed or general automation applications. When operated with three-phase AC input at 400 Volts AC and under ambient conditions that are recommended by Bosch, the output of the FECG01.1-55K0-3P400-A-BN-NNNN-01V01 is 55 kilowatts and 110 Amps. The converter can tolerate up to 15% variation in the input AC supply. The input line frequencies that are supported range from 50 to 60 Hertz. Up to 5% variation in the input line frequency is allowed. The voltage at the output of the FECG01.1-55K0-3P400-A-BN-NNNN-01V01 ranges from 0 to the mains connection voltage. The frequency at the output of the converter ranges from 0 to 650 Hertz. The output of this G-type converter can handle overloads of up to 150% for 60 seconds or 200% for 1 second.
The large control panel on the FECG01.1-55K0-3P400-A-BN-NNNN-01V01 can be used for performance monitoring and for converter configuration. The control panel does not include a potentiometer. The IP20 rated converter housing provides some protection from solids. Since the housing provides no liquid protection, the FECG01.1-55K0-3P400-A-BN-NNNN-01V01 needs to be mounted inside a suitable control cabinet. The converter has to be mounted vertically and with sufficient ventilation to prevent overheating. Bosch recommends minimum 150 millimeters of spacing above and below the converter, and minimum 50 millimeters of spacing on either side of the mounted converter. For converters that are mounted one above the other, it should be ensured that the heated air from the lower converter does not enter the air inlet of the upper converter. A baffle plate can be used if required to prevent hot air from being drawn into the upper frequency converter. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
