Product Description
The Bosch Rexroth FECG01.1-250K-3P400-A-BN-NNNN-01V01 is a Fe series frequency converter. It is G-type converter that is developed for general motor control applications. The Fe series also includes P-type converters that are developed for pump applications. Input rating of the FECG01.1-250K-3P400-A-BN-NNNN-01V01 is 380 to 480 Volts AC (three-phase). The output rating of the converter is 250 kilowatts. Fe series converters that are rated for 11 kilowatts or more include a large operating panel without a potentiometer. Fe series converters that are rated for 15 kilowatts or more require an external brake chopper. An external brake resistor is used with the converter. The output voltage range is 0 Volts to the mains connection voltage. The output frequency range is 0 to 650 Hertz. The overload capacity of G-type converters is 200% for 1 second or 150% for 1 minute.
The ambient conditions recommended by Bosch for operation of the FECG01.1-250K-3P400-A-BN-NNNN-01V01 include -10 to 40 degrees Celsius temperature, less than 90% relative humidity and up to 1000 meters altitude. If the converter is used outside these conditions, its performance will derate and the components could also fail. The warranty is not valid if the converter is used under conditions that are not specified by Bosch. The manufacturer can also not be held liable for any damages that may occur due to improper use of the product. The converter enclosure has an ingress protection rating of IP20. The FECG01.1-250K-3P400-A-BN-NNNN-01V01 should be mounted vertically. The minimum spacing requirement are listed in the product documentation and should be implemented for proper ventilation. Reliable and safe operation of the FECG01.1-250K-3P400-A-BN-NNNN-01V01 converter is only possible if the device is installed by qualified personnel. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
