Product Description
The FECG01.1-200K-3P660-A-BN-NNNN-01V01 frequency converter comes equipped with a status LED that portrays its operating status and rotation direction. The Bosch Rexroth product installation is meant to be carried out at a maximum height of 1,000m over sea level. There must be no corrosive gas, dirt, dust and liquid in the surroundings where the device is installed. The unit should make use of the braking resistor in case of quick braking action. It has a 01 design code. The converter should be installed in a big control enclosure that has a standard design and no potentiometer. The product depicts a 200kW power rating and 660V mains connecting voltage.
The specified lower and upper-frequency limits of the converter should not be deviated for the converter to render stable operation. The internal +24V power supply of the device may be used by its open collector output terminals. The unit uses its PI adjustment function to detect the sensor feedback of the associated control. It must not have icing and moisture condensation on its surface during operation, storage and transport. The product supports operation between an ambient temperature range of -10°C and 40°C during operation. This frequency converter can be dispatched through a reputed logistics network to your address.
This device has a short circuit current rating of 5,000Arms that should never be exceeded. The feedback analog input signal of the unit has an input voltage ranging between 0V and 5V as well as an input resistance of 100 kilo Ohms. The converter depicts precise motor speed control and high startup torque. It supports V/F control mode. The product also portrays programmable skip frequencies. The jogging control function of this device can be set using the “b35” to “b38” parameters. The unit comprises an encoder input and a pulse output. The converter is available with warranty backup for one year.
Wake Industrial Warranty
