Product Description
The FECG01.1-1K50-3P400-A-SP-NNNN-01V01 frequency converter manufactured by Bosch Rexroth has a 01 line code. The converter must not be used underwater. The product is always meant to be mounted in a control cabinet. The device has to always be mounted only in the vertical orientation. There must be sufficient clearance space below and above the control cabinet in which the unit is installed. It is possible to mount one converter above the other. This product must be checked for correct and missing connections after the circuit connection is completed. The power supply voltage of the device should not be more than the allowable voltage range specified on its nameplate.
This product encompasses three-phase inputs and outputs with harmonic components. The device should never have any radio noise filter, surge suppressor or power capacitor fitted on its output side. This can cause the failure of the unit. Its integral solid-state short circuit protection does not offer assurance of branch circuit protection. The converter cover must be mounted after connecting its power supply, control as well as motor terminals and before turning ON the power. The product should be connected to the motor using four-core cables. These cables are connected to its PE, U, V and W terminals.
The converter is typically placed between an AC filter and an AC output choke in a drive system. The GND terminal of this product functions as a common terminal for its analog signals. The cables of this device have to be checked for proper tightening to avoid getting disconnected and resulting in incorrect operation. The unit features gR type fuses to protect the semiconductors in its input. The wiring length has to be as short as possible to connect low analog signals that are affected by external interference easily. This converter has a one-year warranty backing and is eligible for global shipping.
Wake Industrial Warranty
