Product Description
The FECG01.1-19K0-3P400-A-BN-NNNN-01V01 is a digital frequency converter. It is designed for general control applications. It supports U/f control technology with 1 to 8 kilohertz PWM frequency range. The modulation type is magnetic flux PWM modulation. The speed control range is 1:100 with pulse encoder. The maximum startup torque is 150% at 5 Hertz. The digital frequency resolution is 0.01 Hertz. The analog frequency resolution is 0.1% of the maximum frequency. The U/f curve is freely definable. The start frequency for the DC brake is 0 to 60 Hertz. The braking time range for the DC brake is 0 to 10 seconds. Automatic energy saving is supported through the load-dependent adaption of the U/f curve. Automatic PWM frequency adaption is supported through load-dependent adaption of the PWM frequency. The controller on the FECG01.1-19K0-3P400-A-BN-NNNN-01V01 is a PI controller.
The bus system supported by the FECG01.1-19K0-3P400-A-BN-NNNN-01V01 is Modbus and Profibus through an external option. The rated output power is 19 kilowatts. The input voltage range is 380 to 480 Volts AC. The converter can be connected to three-phase AC systems. The FECG01.1-19K0-3P400-A-BN-NNNN-01V01 has an IP20 rated enclosure that should be mounted vertically. Operator panel on the FECG01.1-19K0-3P400-A-BN-NNNN-01V01 is big and does not include a potentiometer. External brake chopper is required for the converter. The brake resistor for the converter is an external unit. The ambient temperature is -10 to 40 degrees Celsius. The maximum installation height is 1000 meters. Above 1000 meters, the output current derates at a rate of 1% for every 100-meter increase in altitude. The relative humidity in the operating environment should be less than 90%. Trained personnel should install and operate the converter. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
