Product Description
The EFC5610-90K0-3P4-MDA-7P-SVPNN-L1NN frequency converter is a new generation device designed by Rexroth Indramat to carry out automation control in the industrial servo system. This converter operates by adjusting the electrical frequency it sends to the industrial motor to meet the expected operational output. The converter has a very high service life, under normal operation conditions, this converter can operate with an efficiency of about 95 percent for more than five years without requiring any major repair operation. Only persons that have been specially trained to operate this converter should be allowed to carry out configuration, installation, and general operation on this converter as the wrong handling of this converter can lead to dangerous movement in the servo system.
The rated power output of this converter is about 90 kilowatts, the overload capacity of this converter is as high as 150 percent of the rated current. The electrical connection of this converter is made up of two main cables; the power cable and the motor feedback cable. The power cable helps in the transmission of electric current while the motor feedback cable is used in the exchange of digital information between the frequency converter and the encoder of the servo motor. This frequency converter generates a fairly high leakage current, thus to prevent electrical accidents, operators should ensure the converter is securely connected to an efficient grounding system.
The EFC5610-90K0-3P4-MDA-7P-SVPNN-L1NN frequency converter can also control the holding brake used with the industrial servo motor, it does this with a brake application frequency that falls between 0 to 50 Hertz. The DC brake is about 0 to 20 seconds. The accurate control of this servo drive can be carried out through the control panel which is integrated into the housing unit of the converter. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
